so here’s the situation. you wanted to smoke, but the only lighter you have, unfortunately, run out of gas. and you have a zippo lighter fluid instead. so here’s what you need :

a zippo lighter fluid, an empty lighter, and a small knife. and here’s how to do it :

Step 1. using the small knife, pull out the lighter’s part that shileds the gas regulator. you can also pull it with your hands but it will be kinda pain in the ass, so let’s just go with the procedure.

note : shown in the photo, this was done with one hand, actually, you need to do it with both of your hands. i only do this because my left hand was holding the camera, duh..

Step 2. remove the shield. and say goodbye to the small knife. you won’t be needing it anymore.

Step 3. pour some lighter fluid to the gas regulator. and be careful not to pour it too much, or you’ll be on fire later, LOL.

Step 4. preparations ready. you’re good to go.

Step 5. light my fire, baby!!

the fire will most likely to remain lighted between 5 to 8 seconds. if you want to light another cig, repeat steps 3 to 5.